Category: Design

The UX of Lego Interface Panels …

paschmann

After posting about the $100 million checkbox … I have been wondering about other really bad interface choices which have made it out into the world (and subsequently were the culprits of disaster). This is a nice article from the Interaction Magic team show casing the UX design of Lego Interface Panels, and some examples of (real world) bad patterns.

The UX of LEGO Interface PanelsLEGO interface panels are beautiful, iconic, and great for learning interface design basics. I bought 52 of them from BrickLink to explore the design, layout and organisation of complex interfaces.Read Moreinteractionmagic.com

Aero Bottle Cover

paschmann

A fun 3D print to Carbon Fiber project.

Designed in Fusion 360, 3D printed a mould and did a wet layup in Carbon Fiber. Pretty happy with the way it came out and impressed it held up even on the really rough NZ chip sealed roads!

There was a lot of trial and error on this due to the deep cavity and needing a vacuum to hold the material in place.

This image has an empty alt attribute; its file name is Screenshot-2024-12-06-at-10.40.24%E2%80%AFAM-1024x717.png

Gridfinity – Endurance Edition

paschmann

Gridfinity is a great solution for 3D printing custom storage solutions. There is a “Gridfinity” layout for hundreds If not thousands of tools, home goods, workshop items, kitchen utensils, you name it … the best part is that if something doesn’t exist, you can pretty easily design and then 3D print it.

Gridfinity Catalog

I decided to take that challenge on since there are not many Gridfinity designs for smaller cycling or workout items, like the Garmin Varia, Drop sweat monitor, Core Body Sensor or Garmin Edge unit I have. Using the design reference and a super handy Plugin for Fusion 360, I designed and printed a bunch to keep my work space organized. Below are some images and the prototypes of the prints. read more

Carbon Fiber Arm Rests

paschmann

This is my second pass at producing something strong enough and reliable enough to put onto my triathlon bike, and in this case some carbon fiber arm rests. My current arm rests pretty much did the job but at 300+g for the set, it seems like an easy win to reduce weight by making something similar out of CF.

The design for these took quite a lot of time, lots of trial and error and mistakes along the way 🙂 Cardboard cutouts, angles and long prints were the most tedious aspects, but ultimately I think they came out OK in the end.

Ideation and prototyping Steps

Tool/CAD Design


Mould 3D printing

These moulds had various finishes I was testing, everything from raw prints to epoxy coated. read more

DIY – Carbon Fiber

paschmann

After years of dreaming and ideating around making carbon fiber products of some sort, I finally had a need to build some custom parts for my triathlon bike. After spending a considerable amount of time reading, watching and listening to tutorials online, I took the plunge and purchased some starter materials. My initial plan was to work with 3D printed moulds and do wet layup.

I purchased a 3D printed started kit from Easy Composites. The shipping was a little expensive (they are based in the UK) but seemed to have the best products, prices and matching material requirements for my needs.

My first project was a simple chain ring cover (which would be the next version of the 3D printed aero cover I 3D printed here). The purpose of this cover is to streamline airflow over the crank while in motion to reduce the bikes Cda (Coefficient of Drag). aka. More slip streamed. read more